2 components epoxy base to dye.
Epoxy thinner (D-90) dilution and cleanliness.
15 / 4 litres
JUNOEPOXY 2C Enamel
Steel surfaces must be properly cleant and rust and calamine free. In order to get a high rust resistance, prime with DYNAPOC 2/C Primer.
On cleant and grease free galvanised surfaces, it is possible to apply it directly. In order to get a high protection, prime with DYNAPOK ZINC PHOSPHATE 2/C Primer.
On cleant and grease free wooden surfaces, it is possible to apply it directly.
Concrete surfaces must be rough and grease stains, rubber, curative agents, whitewash and any other strange component free.
Grease and rubber stains, must be removed with thinners or detergents and rinsed with water afterwards. Use sandbalst if they do not go.
Whitewash and curative agents, must be removed with sandblast or milling, aspiring the dust afterwards. On free silice concretes, use 10% chloridric acid and clean with high water pressure.