Meklēt

JUNOMALTE Satin

Krāsu sistēmas / Apdares/Emaljas krāsas

Base Synthetic Enamel to paint. Satin finish. Indoor use. Dilutes and cleans with MINERAL Turpentine (D-16).


4 / 0,750 litres


JUNOMALTE Enamel Satin

On wooden surfaces, prime with HANGERS Synthetic Sealer. Sand in each coat. On ferric amd steel surfaces, clean and prime with METALEX Primer. On aluminium and galvanised, clean and prime with MULTISUPPORT Primer. On cement, Plaster and Plasterboard surfaces, prime with Synthetic Sealer.

INDOOR

Brush or enamel roller. Ready to use. Apply spreading the paint properly. When painting with pneumatic air spray gun, dilute with a QUICK DRYING Thinner (D-17) 10-15%, not exceeding 30-35 dry microns per coat in both cases. When using orange, yellow or red colours, which are less matt, it is recommended to protect the base with similar covering tones. Applications with over the recommended thicknesses, may cause wrinkling, drying and repainting problems. Outdoor, apply, at least, 2 enamel coats. More aggressives Thinners (D-17, D-45) might cause wrinkling problems and delay the internal drying.

citi lietotāji skatījuši…
JUNO 2014 – Dekoratīvās un profesionālās krāsas, un pārklājumi kopš 1927.